Paper MIT Folding Test Machine 180 Degree Folding Tester Paper board MIT Folding Test Machine

Paper MIT Folding Test Machine

Product use overview
This machine is mainly used for the flexural and flexural life testing of circuit boards (commonly known as FPC flexible circuit boards), paper products and fiberboards.
The test method is to fix the two ends of the test piece on the machine, the lower clamp applies the required load, so that the test piece is subjected to a certain tension, and the lower clamp is in the vertical state of the test piece.
The specimen is bent back and forth to the left and right sides, and the bending angle is set until the test piece is broken and automatically counted.

Design criteria

ASTM-D2176, TAPPI-T423PM, JIS-P8115

Technical parameters
The change in tension caused by the eccentricity of the folding chuck is not more than 0.343N.
Folding head width is 19±1mm
Folding radius 0.38±0.02mm (glass fiber material and other materials can be customized R angle)
Folding port gap distance: 0.25mm / 0.5mm / 0.75mm / 1.00mm (glass fiber material and other materials can be customized chuck)
Man-machine interface: 3.2 in 320*240 dot matrix liquid crystal display, showing the number of folding changes in real time.

Paper MIT Folding Test Machine.pdf

abrasion testing equipment

physical testing equipment

Paper MIT Folding Test Machine 180 Degree Folding Tester Paper board MIT Folding Test Machine Images